Metal Building Insulation - Fiberglass Blanket Insulation - Reinforced Vapor Barrier - Wrinkle Free - Color Coded Rolls - Condensation Blanket - Basement Wall Insulation - Batt Insulation - Kraft Faced Batts - Dow Chemical Thermax - Thermax Sheathing - Polyisocyanurate Foam Board - Foamular - Owens Corning - Dens Deck Gypsum Board - Ceramic Blanket Insulation - Low E - R Control - Quash - Acoustical - Slab Shield - FRP Panels - Ashrae 90.1 Certification - High R Value Banded Systems - Skyweb II - Insulhold

Low E Reflective Insulation - Slab Shield

Low-E® Insulation is the perfect solution for steel building applications of all shapes and sizes. Low-E Insulation installed by itself performs as an insulation, thermal break and vapor barrier. Low-E is often installed in combination with traditional mass insulation to achieve High R-Systems. Low-E is also very effective when installed in retrofit applications when additional insulation is required in existing steel buildings. Low-E insulation products come with numerous features and benefits designed specifically for today’s steel building professionals.

Environmentally Safe Products, Inc. produces the ESP Low-E® line of reflective foil insulation. Low-E is produced from non-toxic polyethylene foam heat laminated between two surfaces of 99.4% pure aluminum facings. Low-E reflective insulation resists all three types of heat transfer: convection, conduction, and radiation. This space age product also provides a full vapor barrier with sound deadening properties. Low-E foil insulation is primarily used in general construction, under roofing, attic spaces, crawl spaces, or in walls, as part of the buildings insulation system. Other uses include HVAC systems, auto/boat/rv insulation, and packaging products. Commercial steel buildings and post frame buildings are also areas that can benefit from Low-E Insulation.

Large lightweight rolls allow for easy installation, and offer much more product for your shipping dollar. Low-E is successfully distributed throughout the 50 states as well as numerous countries and regions.

FOR UNDER SLAB APPLICATIONS. Slab-Shield insulation was designed specifically for use under concrete slabs. This product gives you a vapor barrier and significant thermal performance in one user friendly product. It has a layer of close cell polyethylene foam applied to both sides of our 97% pure aluminum. The closed cell foam is a vapor barrier and protects the foil from the chemical reaction that would occur with uncured concrete. Another difference between Slab-Shield and foam boards is its ability to mold itself to the contours of your grade. Slab-Shield is flexible enough to adjust to the high and low areas helping to create a stronger finished concrete pour. Slab-Shield also does not crack or crumble when faced with the normal abuses the job site may present.

Low E Brochure

Slab Shield